ENVIRONMENTAL IMPACT ASSESSMENT OF MUNICIPAL SOLID WASTE LANDFILLS: A CASE STUDY FROM JORDAN

Landfills have been and will remain the dominant alternative for the ultimate

disposal of municipal solid waste. However, landfilling of solid waste was associated with

certain adverse environmental impacts. This has created some sort of objection from the public

and decision makers’ side for setting a new landfill. One tool to gain the acceptance of the

public and the decision makers is to conduct an EIA study of the selected site, so as to eliminate

and/or minimize the adverse impacts of the site.

This paper is aiming at presenting the Environmental Impact Assessment (EIA) study for Al

Ghabawy landfill site of the Jordanian Capital City (Amman), so as to identify the significant

adverse impacts and to recommend the necessary mitigation measures. Site visits, survey and

scoping session revealed that the most serious issues that might have adverse impacts and

required special attention were leachate and gaseous emissions from the landfill. The study

analyzed the extent of the above impacts and the required measures to avoid or to minimize them

were recommended. Furthermore, operational guidelines, monitoring, and post closure measures

were suggested. The procedure followed and recommendations made by this study may serve as

guidance for planners and decision makers to conduct EIA for landfills under similar conditions

Check Also

California SB 54 Is Here: What Companies Using Plastic Packaging Need To Do Now | JD Supra

SB 54, the Plastic Pollution Prevention and Packaging Producer Responsibility Act, was signed into law on June 30, 2022. Its goal is to create a framework that shifts waste management costs from the local government onto producers. To that end, SB 54 requires producers to (1) reduce the use of Covered Materials; and (2) ensure that all Covered Materials are recyclable or compostable by 2032. The definition of a producer is not 100% straightforward. You are considered a producer if you are the person who manufactures a product that uses covered material and who owns or is the licensee of the brand or trademark under which the product is used in a commercial enterprise, sold, offered for sale, or distributed in the state. [1] However, if no such person is located in California, the producer of the covered material is the owner or, if the owner is not in the state, the exclusive licensee of a brand or trademark under which the product using the covered material is used in a commercial enterprise, sold, offered for sale, or distributed in the state. [2] But if there is no such person in California either, the producer is the person who sells, offers for sale, or distributes the product that uses the covered material in or into the state. [3] To the extent you are a producer, the final regulations implementing SB 54 which went into effect May 1, 2026 have set near-term milestones with which you must comply. First, by June 1, 2026, all producers (subject to very limited exceptions) must either (1) participate in an approved Producer Responsibility Organization ( PRO ), or (2) decide to comply individually and register with CalRecycle. Depending on which path a producer decides to follow, it will also be subject to subsequent deadlines. Producers who plan to participate in an approved PRO must have a producer responsibility plan in place by June 15, 2026. If you choose to comply individually and register with CalRecycle, they must approve you, and once...